HAZARDOUS MATERIAL NOTICE

Hazardous Product Material Overview

Product Name: Sticky Bee Slip Resistant Acrylic Spray.

Description: A clear acrylic slip-resistant coating designed for controlled footing on interior and exterior surfaces.

Compatible Substrates: Wood, concrete, steel, fiberglass, aluminum, and other surfaces.

Key Feature: Self-priming on most surfaces.

Net Weight: 12 oz. / 340 gm.

Directions for Use

Preparation: Surface must be clean and free of contaminants. WARNING: Scraping or sanding old paint may release toxic lead dust.

Mixing: Shake the can until the mixing ball rattles, then shake vigorously for 2 minutes. Shake occasionally during use.

Application: Hold the can 6–12" from the surface. Apply 2 or 3 light coats for a better cure and appearance than one heavy coat.

Nozzle Maintenance: If the spray is irregular, turn the can upside down and spray for 2 to 3 seconds to clear the nozzle. Wipe the tip before resuming.

Storage: Before storing, turn the can upside down and spray until no product comes out (approx. 2 to 3 seconds). Store at temperatures below 120°F.

Safety and Hazards
Flammability: DANGER! EXTREMELY FLAMMABLE. Vapors may ignite explosively or cause flash fires. Keep away from heat, sparks, and open flames.

Ventilation: Use only with adequate cross-ventilation. Do not breathe vapors or spray mist.

Health Risks:

Inhaling concentrated contents is harmful and may be fatal.

May cause permanent brain, nervous system, liver, and kidney damage.

Causes eye, skin, nose, and throat irritation.

California Prop 65 Warning: Contains chemicals known to cause cancer and reproductive harm.

Personal Protection: Wear a NIOSH-approved respirator if vapor levels exceed applicable limits. Wash thoroughly after handling.

First Aid Measures

Inhalation: Move to an area with fresh air. Seek immediate medical assistance if breathing difficulty continues.

Eye Contact: Flush immediately with plenty of water for at least 15 minutes, lifting eyelids occasionally; get medical attention immediately.

Skin Contact: Wash thoroughly with soap and water.

Ingestion: Do not induce vomiting. Call a physician immediately.

Chemical Composition
Contains Acetone, Butane, Propane, Toluene, Xylene, Methyl ethyl ketone, 2-Butoxyethanol, Ethyl benzene, and Benzyl butyl phthalate.